Dover DESTACO ROBOHAND DPL Series Manuel d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dover DESTACO ROBOHAND DPL Series. Dover DESTACO ROBOHAND DPL Series 4 pages.
1.84-1.95 (DPL) RED.qxd
DPL Series Assembled View
1.94
8
64
1
76
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
Dimensions and technical information are subject to change without notice
2/6/06
1:13 PM
Page 94
6
63
53
4
70
72
73
71
74
75
Parallel Grippers | Maintenance and Assembly Procedure
57
2
59
55
54
50
Accessory Installation & Adjustment Instructions
78
77
15
DPL Series
Item Qty Name
01
1
Body
02
2
Piston
04
4
Cap
05
1
Axis
06
2
Jaw
08
1
Shielded Case
50
4
Seal, Cap
51
1
Synchronization Pinion
52
2
Set Screw-Manifold Port Plugs
53
4
Retainer Ring, Cap
54
4
Piston Ring Guidance
55
4
Piston U-Cup
56
4
Magnet
57
2
Drive Pin Retainer Ring
58
2
Stopper-Manifold Port Plugs
59
2
Drive Pin
60
2
Center Retaining Ring
63
4
Jaw Dowel Pin
64
6
Shielded Case Screws
NOTE: Contact the Robohand Sales Department for a
complete spare parts list with order numbers and prices.
Installation - Inductive Sensors Holder Kit
1) Place the flags (#2) on the jaws as shown.
2) Install the sensor holder (#72) on the
adapter (#73) using the screws (#75)
3) Tighten the sensor (not shown) into the
sensor holder(#73).
4) Install the nut (#71) into the slot of the
body and the adapter (#72) on the slot.
Install the screw (#74) to fix the adapter
on the nut.
5) Loosen the screw (#74) and slide the
assembly until the light indicates.
6) Tighten the screw (#74).
Installation - In-Line Jaws
1) Install the interface (#77) onto the jaws.
When combined with the -R option and
according to the mounting direction, the
interface can be used for internal or
external clamping.
2) Tighten the screw (#78) between the
interface (#77) and the jaw.