Amphenol Telect nrgCONTROL-BT Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Amphenol Telect nrgCONTROL-BT. Amphenol Telect nrgCONTROL-BT 11 pages.

Imprimer la page

Section Two: Installation

2.1 Inspection

Please read and understand all instructions before starting installation. If you have questions, contact Amphenol Telect

Technical Support at [email protected] or call 1-509-926-6000.

When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any defective or

missing parts to Amphenol Telect Quality at [email protected] or call 1-509-926-6000. Keep all documentation that

comes with your shipment.

Amphenol Telect is not liable for transit damage. If the product is damaged, please report it to the carrier and contact

Amphenol Telect.

For service or warranty information, please visit Telect.com and click on the "Support" tab, email Amphenol Telect at

[email protected] or call us at 1-509-926-6000.

NOTE: The nrgCONTROL-BT is suitable for installation as part of both a Common Bonding Network (CBN) and an

Isolated Bonding Network (IBN) for installation in Network Telecommunications Facilities and OSP.

NOTE: Do not remove terminal protection brackets until panel is installed in a rack. If the panel is transported outside of

the shipping container, make sure the terminal protection brackets are installed.

ALERT! Verify that all connections meet requirements specified in local electric codes or operating company

guidelines before supplying power. Unit shall be protected by a listed circuit breaker or branch-rated fuse rated

maximum 10A.

ALERT! Install this product within a Restricted Access Location (RAL) where access is through the use of a tool,

lock and key, or other means of security and is controlled by the authority responsible for the location.

ALERT! Only qualified technicians may install and maintain this product.

WARNING! Failure to properly ground this equipment can create hazardous conditions for installation personnel

and for the equipment.

Amphenol Telect

nrgCONTROL-BT

1-509-926-6000 — telect.com