Amphion Impact 400 Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Amphion Impact 400. Amphion Impact 400 8 pages.

Connections and subwoofer controls

1. Mains voltage switch

2. Power switch

3. Fuse box *)

4. Power cord socket

5. Speakers out connection

6. Speakers in connection

7. Volume control

*) Subwoofer fuse is housed in a fuse box which is located in the power cord housing. The fuse box can be opened by pulling it out –

place a small screwdriver to the slot which is inside the opening of power cord socket housing. Always replace the burned fuse with

one of the same value. The correct values are also indicated in the subwoofer control panel.

**) Subwoofer is equipped with auto power-on function, which switches on the power when the subwoofer detects an incoming signal.

If no signal is detected in 10-15 minutes the subwoofer is switched off automatically. Auto power on is selected by placing the Auto-on

switch to ON position.

Liittimet ja säätimet

8. Indicator light (green=on, red=stand-by)

9. Auto-power-on switch **)

10. Low pass crossover adjustment

11. Subwoofer crossover adjustment by-pass switch

12. Phase switch

13. Line level input (RCA input)

14. Line level output (RCA output)