Dover Hydro Connected Total Eclipse Manuel de démarrage rapide - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dover Hydro Connected Total Eclipse. Dover Hydro Connected Total Eclipse 17 pages.
Imprimer la page
initial controller setup (continued)
Setting the Date, Time and Time Zone
After setting the operating language on the first power-up from the factory, or whenever the controller is powered up
afterward, the DATE & TIME menu is displayed.
When installing the controller, you must change the Date, Time, and Time Zone to match the installation location, as this
controls the data contained in reports. NOTE: If using more than one Connected Total Eclipse Controller with the cellular
gateway, ensure all the dates and times are similar.
The display is in ISO 8601 standard format: YYYY-MM-DD HH:MM (Year-Month-Day Hour: Minute). The clock is a 24-hour
clock, with no AM/PM setting.
After doing this, user will also need to set the time zone so that the reports in Hydro Connect display the correct time. There
are nine pre-configured time zones, with the ability to set a custom time zone offset to the UTC time (-12 hours to +14 hours).
Once set, the date and time (real-time clock) are retained by battery power if the main power is turned off or if there is a power
failure.
Setting the Date and Time:
1)
The first number of the year is selected as the active digit, indicated
by the double-arrow cursor.
2)
You can change the value of the active digit by pressing the
Up / Down arrow keys.
3)
To move to the next digit, press the Right arrow key. To
backspace, press the Left arrow key.
4)
When the correct date and time are displayed, press the Enter key
to save the settings and launch the Total Eclipse Home Screen (see
section "Home Screen" on page 9 for more information).
Note:
To exit the Date & Time menu without saving changes and
move to the Home Screen, press the Exit key. Also, the display
will automatically exit the Date & Time menu if no keys are
pressed for 15 seconds, without saving changes.
Setting the Time Zone:
1)
Select the time zone that reflects the area of the world of the
installation. There are 9 preset time zones with an offset from
Universal Time Coordinated (UTC). If the time zone is not
listed, a custom offset can be entered. The time zones are:
•
Eastern NA
•
Central NA
•
Mountain NA
•
Pacific NA
•
Western EU
•
Central EU
•
Eastern EU
•
Thailand
•
China
•
Custom
2)
When the correct time zone/offset is indicated, press the Enter key
to save the setting.
(-5)
(-6)
(-7)
(-8)
(+0)
(+1)
(+2)
(+7)
(+8)
(-12 to +14 adjustable)
DATE & TIME
2018-07-28
17:06
YYYY-MM-DD HH:MM
OK
EXIT
TIME ZONE
EST
E a s t e r n N A
CST
C e n t r a l N A
MST
M o u n t a i n N A
PST
P a c i f i c N A
GMT
We s t e r n E U
CET
C e n t r a l E U
TIME ZONE
GMT
We s t e r n E U
CET
C e n t r a l E U
EET
E a s t e r n E U
ICT
T h a i l a n d
CST
C h i n a
CUSTOM
7