Amphony iFinity 800 Manuel d'utilisation et d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Amphony iFinity 800. Amphony iFinity 800 7 pages. Wireless audio receiver
Imprimer la pageUser and Installation Guide
Troubleshooting
Problem
Possible Cause
No audio at receiver
No wireless signal
Receiver not paired
Faulty AC adapter
or faulty power outlet
Strong interference
Audio volume too low
Audio is distorted
Strong interference
Receiver audio level
Audio volume too low
is too low
Transmitter volume
control set too low
Audio drops out
Strong interference
inter mittently or
crackles
Unstable power
supply
Audio drops out
Strong interference
inter mittently or
crackles
Unstable power
supply
Page 7
Solut ion
Check that your iFinity transmitter is
plugged in.
Pair the receiver with your iFinity
transmitter.
Check the receiver power supply.
See under "Strong Interference" on next
page.
See below under "Audio volume too low".
See under "Strong Interference" on next
page.
Connect transmitter to an adjustable
audio output
Adjust the transmitter volume control to
achieve desired audio level.
See under "Strong Interference" on next
page.
See under "Unstable power supply"
below.
See under "Strong
Interference" on next page.
Ensure that the power outlet
delivers a stable vol tage. Very
strong surges or vol tage
fluctuations may cause audio
dr opouts. Tr y using a s urge
pr otector.
User and Installation Guide
Problem
Possible Cause
T ransmitter range is
Strong interference
extremely short
Too many obstacles
T ransmitter affects
iFinity Tr ansmitter or
wireless LAN speed
Receiver too close to
wireless LAN device
For up-to-date troubleshooting advice, visit www.amphony.com
Solut ion
In some cas es, there may be strong
interference preventing pr oper reception
of the audio signal which can be caused
by wireless networks or cordless phones .
Either eliminate the interference, locate
the base unit of the cor dless phone in
another r oom, set the wireless network to
us e the 5.8 GHz frequenc y band rather
than 2.4 GHz, relocate the transmitter,
relocate or reorient the receiver to
improve reception. Als o, try to lower the
power output of your wireless LAN router.
Audio will dr op out if there are too many
obstacles between the transmitter and the
receiver, try relocating the transmitter or
receiver to impr ove rec eption.
Increase the distance between the iFinity
transmitter or iF inity receiver and your
wireless LAN router.
Page 8