Combi City Savvy Select 2520 Series Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Combi City Savvy Select 2520 Series. Combi City Savvy Select 2520 Series 13 pages.
Imprimer la pageUsing the Safety Cover (Boot)
Installing the Safety Cover (Boot)
1. Lift the seat cushion and pull safety cover
(boot) out.
2. Place the safety cover (boot) over the
guardrail and secure it with the velcro.
Removing the Basket
Front of
Stroller
Removing/Attaching the Seat Cushion
Attaching
1. Attach Velcro at the bottom
of the seat pad to Velcro on
the stroller base.
2. Pull top of seat pad forward;
the seat pad can rest on the
front guard rail.
3. Insert buckle strap into slot at
the bottom back of the seat
pad.
Removing
1. Press levers down on
right and left harness
Seat Base
hooks to detach hooks
from buckle tongues.
2. Press buckle button
down (with Combi logo)
Velcro
and detach buckle
tongues from buckle.
3. Remove shoulder pads
from harness by pulling
over harness
hooks.
4. Locate zipper on the back
of the seat pad and locate
the zipper in the seat bite
of the stroller. (The boot
also has a zipper; do not
use the boot zipper to
attach the cover)
Zip seat pad to stroller.
WArNINg:
into leg openings and strangle.
Never use in reclined carriage
position(s) unless safety cover
(boot) is securely fastened.
CAUTION
Do not place more than 11 lbs. in the basket.
Remove all items from the basket before folding the stroller.
1. Unhook and unloop the front straps of the basket
from the front of the seat frame.
2. Unsnap the basket from its frame.
(Snaps are located on the basket near the rear
legs.)
3. Slide the basket off the basket frame.
Child may slip
CAUTION
Before folding the stroller,
unfasten and store the
safety cover (boot) under
the seat. The stroller will
not fold with it attached.
CAUTION
If seat cushion is ripped or torn,
do not use.
Do not use the stroller without
the seat cushion.
4. Pull top of seat pad forward to
detach Velcro..
5. Pull all the harness straps
through the top and side slots in
cover.
6. Unzip zipper at the base of the
seat cover.
7. Pull bottom of seat pad upward
to detach Velcro
5. Insert harness straps with
hooks and harness straps
with buckle tongues thru
slots on back of seat pad.
6. Attach Velcro on top of seat
pad to stroller.
- 6 -