Combi Flash 7650 Series Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Combi Flash 7650 Series. Combi Flash 7650 Series 13 pages.

Imprimer la page

Attaching/Releasing Infant Seat

Trade name and trademarks of Graco

of or approval by them is intended or implied. All Combi Flash strollers are compatible with specified models of the Graco

Evenflo

infant car seat/carrier models as of the date this printing was prepared.

1. Use object to press in plastic tabs to release right and left end caps.

(See diagram A)

of the stroller on the plastic right and left rail covers.

Right and left end caps will be released by pressing in plastic tabs.

(See diagram B)

Bauer or Evenflo Discovery infant carrier.

2. Unbuckle the

attachment

strap and lay

over the right

and left side

of the stroller

frame.

3. Hook the infant

seat onto front

rail of the stroller.

The foot end of

infant car seat/

carrier will rest on

the two L-shaped

brackets.

3. Bring the infant seat attachment straps through the

seat belt guides in the infant car seat/carrier and fas-

ten the buckle. To loosen, tilt the buckle and pull up.

To tighen, pull the strap.

Never use this product without securing the attachment

strap to the infant seat.

The infant harness must be buckled correctly per your

manufacturer's instructions.

Make sure you tighten the attachment strap before

usage.

REMOVING THE INFANT SEAT/CARRIER

Remove the infant car seat/carrier by reversing the

above steps. See your infant car seat manufacturer's

instructions for proper release lever operation.

, Century

, Evenflo

and Cosco

Cosco Eddie Bauer

Evenflo Discovery

The plastic tabs are located underneath the front rail

End caps must be removed to install Cosco Eddie

WARNING

are the property of their respective owners and no endorsement

Note: Illustrations are for

reference only and may not

represent the actual product.

(See diagram 1)

Remove End Cap

, Century

, and

- 6 -