Follett 400 Series Manuel d'installation et d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Follett 400 Series. Follett 400 Series 20 pages. Icemaker and top kit for remcor/cornelius countertop ice and beverage dispensers

Imprimer la page

Installation

1. Install Cornelius ice dispenser according to

manufacturer's specifications.

Note: We recommend that the dispenser

back

be mounted at least 1" (26mm) from wall to

allow

water, drain and electric lines from top-mount

icemakers to be concealed behind dispenser.

2. Disconnect power to dispenser.

3. Remove front panel/merchandiser from the dispenser.

4. Adjust the agitation timer located on Cornelius PC

board to 1 second on – 1 hour off (Fig. 1).

5. Install supplied

nugget ice diverter at

dispenser opening.

a) Disassemble

chute assembly

and discard gate

restrictor (Fig. 2.1).

b) Reassemble with

supplied ice

diverter as shown

(Fig. 2.2).

6. Reinstall front panel.

Fig. 2

ice diverter

(supplied)

ice chute

flat washer

10-32 nut

Fig. 1

agitation

timer

OFF

storage hopper

gate

mounting

plate

apply RTV to this

surface to seal to

mounting plate

gasket

gate

restrictor

plate

flange extends

into storage

hopper through

gate opening

hopper gate