Combi MECHACAL HANDY AUTO4CAS Manuel d'instruction - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Combi MECHACAL HANDY AUTO4CAS. Combi MECHACAL HANDY AUTO4CAS 20 pages.
Imprimer la page
Installing the head support (Figure 5.2)
Loop the head support belt through the head support hole, the belt is tipped opposite
through the hole to attach. After it is installed, check if it is well secured to the seat cushion
or not by slightly pulling.
Reference for head support insertion outlets
for child from around 1 month to 4 months
A
Installing Body & Hip support (Figure 5.3)
Pass the rear side belt through the body support belt hole of the seat cushion.
1
The belt is tipped opposite through the hole to be attached.
Pass the seat side belt through the buttock support belt hole of the seat cushion.
2
The belt is tipped opposite through the hole to be attached.
To use with Egg shock pad (Figure 5.4)
Putting into the head support to use.
The Egg shock pad can be inserted into the head support of Dacco Seat to protect child from
the vibrations from the ground when strolling.
Insert the Egg shock pad from the rear packet of the head support.
Installing the ASTM foot-cover (Figure 6.1)
1.Press and hold the button at the left end of the front guard,put a band and foot cover onto
the front guard as illustration.
2.Tie up another band to the projected part, plug the front guard into the projected part at
the end of the armrest.
3.To attach front guard and fasten the holding strings to the rear leg tubes to complete the
installation.
Foot cover (Figure 7.1)
To attach the foot-cover
1. Secure the velcro tape(both left and right) through the seat frame tube
2. Snap the foot -cover onto the seat cushion(total 4 places)
To detach the foot-cover
To follow the opposite procedure to detach the foot-cover
A B
for child from around 4 months to 7 months.
B
15