Combi Perfect Match 6525 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Combi Perfect Match 6525. Combi Perfect Match 6525 13 pages.

Imprimer la page

Opening the Stroller

1. Press the pivot

buttons in and

raise pivot

handle.

2. Release the

manual latch

located on the

side of the

stroller.

Attaching the Rear Wheels

1. Place the rear axle and

rear wheel holders in

front of you with the leg

opening facing up and

the brake levers toward

you. Slide each wheel

holder onto the axle.

2. Place each wheel on the axle with the brake projections to the inside.

3. Place a washer on the axle, on the outside of each wheel. (In some

instances, more than one washer on each side may be necessary to

take up free play. If binding is noted, remove one of the washers.)

4. Push the straight end of the pin through the hole in each end of the axle

to lock the wheels and holders in place (See

5. Cover the exposed axle ends with wheel caps.

6. Lay the stroller on its front with the rear legs up. (See

rear wheel holders with the brake levers facing up onto the rear legs

until they click into place.

- 3 -

3. Place one hand on

the handle and one

hand on the seat.

While grasping the

handle, push the

seat away from the

handle until the

stroller opens

entirely and locks

into the opened

position

). Slip the

4. Pull the basket frame until it clicks

and locks into place.

Note: The basket locks into a fixed

position and is not moveable.

Pushing the pin

Attaching the rear

wheel unit to the

main body