Combi Perfect Match 6630 Series Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Combi Perfect Match 6630 Series. Combi Perfect Match 6630 Series 13 pages.
Également pour Combi Perfect Match 6630 Series : Manuel d'instruction (13 pages)

Imprimer la page

Using the Guardrail

The trade name and trademarks of Graco

by them is intended or implied. All COMBI Perfect Match

the date this publication was prepared. Also compatible with Cosco

- 8 -

COMBI International Corporation • • 199 Easy St. • • Carol Stream, IL 60188 • • www.combi-intl.com

Customer Service 1-800-992-6624 • • 10:00 a.m. - 5:00 p.m. Central Standard Time • • Monday - Friday

All manuals and user guides at all-guides.com

CAUTION

Pull on each side of Perfect Match

sure that it is completely attached.

1. Remove Kids Tray and attach Perfect Match

to position the Perfect Match

Keep Positioning Rings

toward the ends of

the guardrail.

2. Recline the backrest to the middle position. Pull the Carrier

Attachment Straps from behind the seat cushion and lay them over

the armrests.

Note:

When using the Evenflo

the backrest in the up-right position to provide the proper recline angle on

the infant seat/carrier.

Carrier Attachment Straps

3. Hook carrier over the Perfect Match

infant car seat/carrier is solidly against the stroller.

Push the Positioning Rings snuggly against the each side of the car

seat/carrier.

4. Bring the Carrier Attachment Straps through the slots in the infant car

seat/carrier and fasten the buckle. (If the strap is the incorrect length,

adjust as needed. To adjust, thread fabric through each side of the

buckle.)

To remove individual sides of the guardrail:

, Century

, Evenflo and Cosco

are the property of their respective owners, and no endorsement of or approval

™

strollers are compatible with all of these manufacturer's infant car seat/carrier models as of

Opus 35 infant car seat/carrier.

™

Guardrail to make

Guardrail being careful

™

Guardrail with the labels facing up.

Positioning

Rings

infant car seat/carrier it may be necessary to leave

Guardrail and rotate until the

™

1. Remove the infant car seat/carrier by

reversing the above steps.

2. Press the buttons on the underside of the

armrest (as shown) while pulling on the

guardrail to remove.