Follett HCC1010AHT Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Follett HCC1010AHT. Follett HCC1010AHT 8 pages. Self-contained chewblet ice machine
Également pour Follett HCC1010AHT : Manuel (8 pages)
Imprimer la page
1 – Locating the ice machine
Horizon Elite self‑contained Chewblet ice machines allow top‑mounting or mounting in a base cabinet, on a wall or on a floor stand up
to 75' (22.9 m) from the dispenser or ice bin with RIDE technology. In‑cabinet mounting (RIDE applications) require special attention to
service access, unit ventilation and ice tube runs (see pages 4‑8).
Top mounting – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with
nugget ice. See page 4 for compatible ice
and beverage dispenser models and top
kit numbers.
2. Verify ceiling or soffit height to ensure
sufficient top clearance.
RIDE model – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with nugget
ice. Compatible dispensers include Coca‑Cola
Freestyle 9000, Cornelius DB/ID/DF150/175,
Lancer 4500‑22N, FS‑16N, FS‑22N and
FS‑44N, Servend MD150/175/200/250,
SV175/200/250, MDH‑402 and
Follett Symphony Plus™ 110CM, as well as
dispensers listed on page 4.
2. Coca‑Cola Freestyle 7100 requires top adapter
IC Code 46751 and ice kit IC Code 46430 only,
and must be ordered from Coca‑Cola. Coca‑
Cola Freestyle 9100 requires top kit HSF26SC.
Consult with Coca‑Cola and Follett to qualify
application prior to ordering.
3. RIDE application is approved only for
Pepsi Spire 3.0, 5.0 and 4.1 designed for top
mount ice machines and requires MSP24SC
for 3.0 and MSP30SC for 5.0 and 4.1, ordered
separately. For manual fill versions of Pepsi
Spire 3.0, 5.0 and 4.1, contact factory.
4. See page 4‑6 for critical clearance and
venting requirements.
Self-contained 1010, 1410 series ice machine
RIDE model – Follett low-profile Vision
ice and beverage dispensers
Important specifier notes
1. See page 4‑6 for critical clearance and
venting requirements.
2. Ice transport tube ships with Vision
ice and beverage dispenser (Vision
applications only).
RIDE model – drop-in beverage
dispensers (by others)
Important specifier notes
1. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323, and Lancer
2200, 2300, 23300.
2. Require 12.00" (30.5 cm) of access space for
installation on transport tube side.
3. See page 4‑6 for critical
clearance requirements.
Top mount on Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Verify ceiling or soffit height to ensure
top clearance.
3. Locate floor sink or grate and drains in front
of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce
bin cart.
™
RIDE model – Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Locate floor sink or grate and drains in front
of storage bin.
3. Do not position bin drain lines to block
Ice•DevIce bin cart.
3
Form# 7030