Ampler Pennon Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ampler Pennon. Ampler Pennon 16 pages. 2017

6/16

Assist modes

Turn the lights on

State of Charge

V1.1, 24.04.19

Power on the bike

The bike has two assist modes which can be fully

customised with the Ampler Bikes app. You can

switch between these modes with the app or via the

user interface button. Press it down and hold it as for

turning on the lights but just a bit longer (for at least

3 seconds) until it turns orange. Now after releasing

the button it will blink once if it changes to assist

mode 1 or twice if it changes to assist mode 2.

To turn on the lights press the user interface button

and hold it for a second until the button goes green.

Now after releasing it the lights will turn on. You can

switch between on and off by doing this again. The

bike will remember the last setting, so the lights will

be on when you leave them on next time you power

the bike.

The user interface button also acts as a battery char-

ge monitor. The led colours according to the state of

charge.

0–10% Blinking red

10–50% Transition from red to yellow

50–75% Transition from yellow to green

75–100% Green

Customise your riding experience with the app

In order to fully customise your riding experience

please download the Ampler Bikes available for And-

roid and iOS.