Ampler Stellar 2020 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ampler Stellar 2020. Ampler Stellar 2020 18 pages.

Turning the bike on

Charging the bike

State of charge

Turning the lights on

V2.3 03.11.20

Using the Power Butt on

Just press the power button once on the power panel, located on the

left side of the bike.

bike is OFF

1x short press

The battery level is between 40%-90% when you receive it. You can

either plug in the charger and make the batt ery full, but you can also

grab it out of the box and go.

Charging the bike is like charging a laptop. Just connect the bike with

a standard wall power outlet (110–240 V AC) and hook the magnetic

charger plug to the charging socket located on the power panel and

let it charge. Once the LED on the charger turns from red to green it

has been fully charged. It takes about 2.5 hours from empty to full.

Ampler charger will automatically stop charging when the battery is

full. There is no risk of overcharging the battery when you forget to

unplug it. For your protection, please read carefully "Charger safety

manual" chapter below before operating the Ampler battery charger.

The power button also acts as a battery charge monitor. The LED

colours according to the state of charge.

100–75%

74–50%

To turn the lights ON and OFF, hold the power button for 1–2 seconds.

You can turn the lights on/off also from your Ampler mobile app.

The bike will remember the last setting, so the lights will be ON when

you leave them on next time you power the bike.

bike is ON

press + hold

bike is ON

49–10%

9–0%

front + rear lights

release

switch ON/OFF