Follett HCE1410WHT Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Follett HCE1410WHT. Follett HCE1410WHT 8 pages. Chewblet ice machine

Follett HCE1410WHT Manuel
6 – Horizon Elite ice tube runs - specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
beverage
dispenser
minimum of
6.00" (15.24 cm)
turn/corner
ice transport tube –
1 3/16" OD,
2 1/8" OD with insulation
Ice production – Horizon Elite 1010 series, 60 Hz,
air-cooled models
Inlet water
temperature
F (C)
60 (16)
70 (21)
50 (10)
1160 (526)
1061 (481)
60 (16)
1093 (496)
1001 (454)
70 (21)
1026 (465)
941 (427)
80 (27)
971 (440)
893 (405)
90 (32)
917 (416)
941 (427)
Ice production – All Horizon Elite 1010 series,
water-cooled models
Potable
Condenser water temperature F (C)
water
temperature
60 (16)
70 (21)
F (C)
50 (10)
1096 (498)
1043 (473)
60 (16)
1006 (457)
970 (440)
70 (21)
917 (416)
898 (408)
80 (27)
874 (397)
826 (375)
90 (32)
831 (377)
778 (353)
Agion is a registered trademark of Sciessent LLC.
HORIZON ELITE, ICE•DEVICE, ICE MANAGER, MICRO CHEWBLET, SAFECLEAN PLUS, SANISPONGE, SYMPHONY PLUS and VISION are trademarks of Follett LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
Self-contained 1010, 1410 series ice machine
7030‑202002 | © Follett LLC
support
maximum
straps
2' (60.9 cm)
radius
transport tube slope
(toward ice machine)
1/4"
(2 cm per meter)
Ambient air temperature F (C)
80 (27)
90 (32)
100 (38)
962 (436)
825 (374)
688 (312)
909 (412)
795 (361)
681 (309)
857 (389)
765 (347)
674 (306)
815 (370)
730 (331)
644 (292)
773 (350)
694 (315)
614 (279)
80 (27)
90 (32)
100 (38)
1001 (454)
947 (430)
892 (405)
938 (426)
888 (403)
839 (381)
874 (396)
830 (377)
786 (357)
826 (375)
787 (357)
749 (340)
778 (353)
745 (338)
712 (323)
wall-mounted
ice machine
1'
Ice production – All Horizon Elite 1410 series,
air-cooled models
Inlet water
temperature
F (C)
50 (10)
60 (16)
70 (21)
80 (27)
90 (32)
Ice production – All Horizon Elite 1410 series, water-
cooled models
Potable
water
temperature
F (C)
50 (10)
60 (16)
70 (21)
80 (27)
90 (32)
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
Important specifier notes
1. 75' (22.8 m) maximum ice transport tube run.
2. Tubing routing bends must have a
6.00" (15.24 cm) radius or larger.
3. Dips and traps are not allowed. If not
supported from underneath, secure insulated
ice transport tube at least every 2' (60.9 cm)
to prevent drips and traps.
4. Relative humidity levels above 80% in areas
where the ice machine or ice transport tube is
located may produce excessive condensation
that will cause water damage.
5. Contact factory for recommendations on
running tubing through a decorative soffit
or chase.
Ambient air temperature F (C)
60 (16)
70 (21)
80 (27)
1593 (723)
1466 (665)
1339 (607)
1518 (689)
1396 (633)
1275 (579)
1442 (654)
1327 (602)
1211 (549)
1394 (632)
1272 (577)
1150 (522)
1345 (610)
1327 (602)
1089 (494)
Condenser water temperature F (C)
60 (16)
70 (21)
80 (27)
1436 (652)
1411 (641)
1385 (607)
1417 (643)
1367 (633)
1318 (621)
1397 (634)
1324 (602)
1251 (568)
1318 (598)
1253 (577)
1189 (540)
1238 (562)
1183 (602)
1127 (512)
90 (32)
100 (38)
1230 (558)
1121 (508)
1163 (528)
1052 (478)
1097 (498)
982 (446)
1050 (477)
950 (431)
1004 (456)
918 (417)
90 (32)
100 (38)
1370 (622)
1354 (615)
1307 (593)
1296 (588)
1245 (565)
1238 (562)
1170 (531)
1151 (522)
1096 (497)
1064 (483)