Dowco Fastrax 50144-00 Instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dowco Fastrax 50144-00. Dowco Fastrax 50144-00 3 pages. Fastrax backroads tail bag

Imprimer la page

Mounted Tail Bag to Saddlebags

a. Install saddlebags on bike per instructions included with the saddlebag

b. Place Tail bag on tail section of bike with handle toward the rear.

c. Connect one end of the 12" long straps to the (4) D-rings on the bottom of the Tail bag.

d. Connect the other end of the front (2) 12" straps to the front D-ring on the saddlebags.

e. Connect the other end of the back (2)

f. Adjust all straps to securely position bag in desired location

g. Insure that the bag does not interfere with steering between full left and full right positions. If you encounter

interference, readjust bag position using adjustable straps.

Fig. 3

29" STRAP

4. Maintenance:

Periodically check position of bags. Re-adjust and / or Re-tighten as required.

5. Care and Cleaning:

Wash using mild house hold detergent and soft brush to remove dirt or road grime. Rinse thoroughly and dry before using. Do not

put in washer or dryer, dry cleaning is not recommended.

6. Customer Service:

For further information contact Dowco Inc. at:

DOWCO Inc.

4230 Clipper Dr.

Manitowoc, WI 54220 USA

www.dowcopowersports.com

01072

INSTALLATION INSTRUCTIONS

BAG INSTALLATION: 50144-00

FASTRAX BACKROADS TAIL BAG

Caution

Allowing straps to hang loose may

cause damage to bags and/or

painted finishes on bike

Fig. 4

D-RINGS

12" STRAP

7/14