Caraudio-Systems dvbLOGi Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Caraudio-Systems dvbLOGi. Caraudio-Systems dvbLOGi 16 pages. For bmw professional navigation systems ccc and cic with idrive

2.6.4. After-market rear-seat-entertainment

Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of harness C3C-AVIR.
Note: As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.

3. Operation

3.1.

Activation of the video-in-motion function

On vehicles with CIC (8-button iDrive) the video-in-motion function is permanently active
without disturbing the navigation performance.
On vehicles with CCC or E65 navigation (1 or 2 button iDrive) press the menu-button or the
iDrive wheel for about 3 seconds while in main menu. Alternatively it is possible to set dip-
switch 1 of the CAN box TV-436 to ON. But then the navigation performance is disturbed on
the first few kilometres of driving.
3.2.

Selecting the dvbLOGiC as current AV-source

In the vehicle's main menu, select Infotainment and then TV by iDrive to choose the
dvbLOGiC as current AV-source.
Version 22.07.2014
DT1-CXC-TV1