Caraudio-Systems c.LOGiC C2-CIC Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Caraudio-Systems c.LOGiC C2-CIC. Caraudio-Systems c.LOGiC C2-CIC 13 pages. For bmw professional navigation systems with idrive and 6.5”/8.8” monitor

Imprimer la page

4. Operation

4.1.

Activation of the video-in-motion function

On vehicles with CIC (8-button iDrive) the video-in-motion function is permanently active

without disturbing the navigation performance.

On vehicles with CCC or E65 navigation (1 or 2 button iDrive) press the menu-button or the

iDrive wheel for about 3 seconds while in main menu. Alternatively it is possible to set dip-

switch 1 of the CAN box TV-436 to ON. But then the navigation performance is disturbed on

the first few kilometres of driving.

4.2.

Selecting the c.LOGiC as current AV source

In the vehicle's main menu, select Infotainment and then TV by iDrive to choose the c.LOGiC

as current AV-source.

4.3.

Assigning device control

After selecting the c.LOGiC as current AV source,

push iDrive knob to open the control menu. Select

control levels (setup) DEV1:RCxx and (setup) DEV2:

RCxx one after another and assign related IR-codes

as described in device control table.

Note: The IR-control channel DEV1 is preset to RC-Code 41 compatible DVB-T tuners and

DEV2 is preset to RC-Code 09 for the usbLiNK.

If the AV2 is deactivated (see chapter 1.4.2.), the menu item USE DEV2 and DEV2:RCxx will

not be available.

4.4.

Using device control

Choose USE DEV1(DEV2) to switch to AV1(AV2). After selection the menu will close

automatically and switch to the selected AV-input of the interface. The iDrive knob, some

Multi-function-steering wheel buttons and some navigation buttons (HU) are now available

for remote functions in the selected control level (see assignment table for iDrive below).

By pressing the iDrive-MENU-button, the system returns to the factory iDrive functions. By

pressing the iDrive knob again, the control level menu opens up again, and it is possible to

switch to the other AV-input or to adjust IR-code assignments.

Version 22.03.2011

C2-CCC/C2-CIC