1byone ROCK PIGEON 1-AD07US03 Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 1byone ROCK PIGEON 1-AD07US03. 1byone ROCK PIGEON 1-AD07US03 17 pages. Belt drive turntable system
Imprimer la page
Operation
Turntable Operation
n
no
1. Connect the AC-DC Adapter to the AC-DC POWER Jack on the
back of the unit.
2. Remove the stylus protector from the stylus.
3. Place a record on the slip mat. If using 45 RPM records, put
the 45 RPM adapter on the center spindle before placing the
record on the platter.
4. Turn the STOP/VOLUME Dial to start the turntable. The platter will start spinning
5. Turn the 33/45 RPM Selector to select the correct RPM for the record.
6. Unlock the tonearm clip and set the Lift Lever to the up position.
7. Position the tonearm over the desired location (groove) on the record.
8. Move the tonearm lift lever to the down position to move the tonearm towar
record.
9. Carefully lower the tonearm on the record.
10. Adjust the VOLUME control to set the volume as desired.
11. When you are finished playing the record, set the lift lever to up position, rais
tonearm and return it to rest on the arm clip. Turn the STOP/VOLUME Dial to S
s.
12. The working principle of the turntable is that the cartridge obtains the analo
music signal on the record, which could be affected by the high magnetics,
frequency, and high voltage indoors or outdoors. If there is high magnetics, h
frequency, and high voltage indoors or outdoors, please ground the turntab
to a grounded metal object with the included ground wire to enhance the a
interference of the turntable and obtain a premium and clear sound quality
ar
he
nd
d
r
7
45RPM Adapter