Caraudio-Systems V5-NTG45-PNP Manuel - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Caraudio-Systems V5-NTG45-PNP. Caraudio-Systems V5-NTG45-PNP 17 pages. Compatible with mercedes benz vehicles with comand online ntg4.5 navigation and audio20 ntg45 system with 4pin hsd lvds connector
Imprimer la page
3.2.1.2.
Settings for connecting an after-market front camera
You have to configure some settings in the OSD-menus INPUTS and MISC if you want to
connect an after-market front camera (Operation of the OSD: see chapter "OSD-Operation").
OSD-menu
Menu item
REAR CAM
INPUTS
FRONT CAM
MISC
REVERSE LOGIC
Note: RGEAR+SPEED / RGEAR+TIME setting: After deactivation you can't enable the parking
process again until the vehicle is driving faster than 20km/h / less than 20 seconds has
passed or the ignition is switched off and on.
Version 03.06.2015
Setting
Explication
OFF
No rear view-camera
ON
Rear view-camera connected
OEM
Factory rear view-camera connected
Switches to front camera if parking
ON
process is enabled and reverse gear is
released
C:RGEAR
Enabled while parking process
Enabled with +12V on white wire and up
C:RGEAR+TIME
to 20 second
Enabled while parking process and up to
C:RGEAR+SPEED
20 km/h
A:RGEAR
Enabled with +12V on white wire
Enabled with +12V on white wire and up
A:RGEAR+TIME
to 20 second
Enabled with +12V on white wire and up
A:RGEAR+SPEED
to 20 km/h
V5-NTG45-PNP