Dahua DH-PFLR2110-8ET-120 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dahua DH-PFLR2110-8ET-120. Dahua DH-PFLR2110-8ET-120 10 pages. 8-port epoe switch
Imprimer la page
Dahua 8-Port ePoE Switch User's Manual
The power indicator light can display the current operation status of PoE power supply, which includes
three statuses: single port device power on, single port device power off and total device consumption
overload. Please refer to Table 2-2 for more details.
SN
Operation Status
1
Single port device power on
2
Single port device power off
3
Total device consumption
overload
Port indicator light is to display the status of current transmission mode for the port, which includes IEEE
mode, E100 and E10. Please refer to Table 2-3 for more details.
SN
Working mode
1
IEEE mode
2
E100
3
E10
2.2 Rear Panel
The device power port is shown in
SN
Parameter
1
PWR1
2
PWR2
3
2.3 PoE Power Supply
Six 100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply.
Two 100M RJ45 port supports IEEE802.3af, IEEE802.3at standard and Hi-PoE 60W power supply.
Total power consumption of PoE device is not allowed to exceed the reserve value of device PoE
power consumption.
Display Mode
Slow flash twice
Quick flash once, slow flash once
Quick flash twice
Table 2-2
Indicator light display
Normally on
On for 3 seconds, off for 1 second
On for 1 second, off for 1 second
Table 2-3
Figure 2-2; it supports dual power input.
Figure 2-2
Note
Support DC 48~57V
Support DC 48~57V
Ground wire
- 4 -