Doyon Artisan Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Doyon Artisan. Doyon Artisan 18 pages.
Imprimer la page
3 | First time heating process (control panel 8090)
When the oven is turned on for the first time it will
automatically
enter
Ramalhos
the message: funtion test and first Heating on
the display of the control panel. You can use the
+
–
and
, buttons to select one of the operation op-
tions shown alternately on the display:
1) function test:
It is used to check the oven is functioning properly after in-
stallation. During this phase the oven temperature will not
surpass 50º C. To initiate the function test press the
ton.
F t
r A
note
To return to Ramalhos mode, press the
turn the oven off and on again.
2) first time heating the oven
F h
r A
Heating the oven for the first time is extremely important
to ensure its future proper functioning and avoid structural
problems. The first heating programme must be executed
in full and only after it has been completed does the con-
trol panel enter normal operation mode. If there is a power
cut, the programme will restart in the last temperature re-
mode
and
show
but-
Oven Function test
Ramalhos mode
button to
First heating of the oven.
Ramalhos mode
corded with a 25ºC margin. To start this programme press
the
button.
F h
r A
n - 6
1 0 0
1 5
1 0 0
The whole process will be managed automatically by the
control panel.
Throughout the process the display will alternately show dif-
ferent information, namely:
note
The first heating process may take up to 6 hours.
END OF FIRST HEATING PROCESS
Once all stages of the first heating programme are complet-
ed the control panel will show the following information:
F h
r A
E n d
Finally press
, you may now start the baking cycle.
MODULRAM DIGITAL | Edition A - Revision 0
First heating of the oven
Ramalhos mode
"n " corresponds to the present phase
and "6 " is the number of the first time
heating programme phase
TOP temperature
Remaining time of the corresponding
maintenance or resting phase
STONE temperature
First heating of the oven
Ramalhos mode
End of first heating process
Instruction Manual | 6