Amplitec C20L-EGSM Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Amplitec C20L-EGSM. Amplitec C20L-EGSM 13 pages.

C20L Signal Booster

Installation Guide

Installation Requirements

1) Stable and independent power supply
2) No corrosive gas, smoke or liquid leakage
3) Sun block and good for heat dissipation
4) Easy for cabling, safe and easy for maintenance
5) Waterproof and under thunder protection

Installation Tools

No.
Items
1
Percussion drill
2
Wrench
3
Expansion tubes, screws
4
Mobile phone for testing
5
Multimeter
6
Screwdriver
7
Waterproof tape

Installation Steps

The repeater should be installed on a solid and hard plane. The installation steps are as follows:
1) Find a suitable site according to the installation requirements, size and dimension of the booster.
2) Estimate and mark the site of U-shaped back holder installation holes. Drill holes with the
percussion drill. Sizes are 7mm.
Quantity
1
Drill holes on wall, self-provided
1
Reinforce the interface connection, self-provided
4 for each Fix the device on the wall, included in the package
1
Test installation effectiveness, self-provided
1
Test voltage and wiring connection, self-provided
1
Tighten or fasten the device, self-provided
Prevent liquid from leaking into the feeder
A lot
interface, self-provided
8
Remarks