1byone Easy Chime OUKQH-0536 Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 1byone Easy Chime OUKQH-0536. 1byone Easy Chime OUKQH-0536 11 pages.
Imprimer la page
Weak batteries can greatly reduce the ringtone
volume of the receiver, please change the
batteries every 8-10 months.
Safety note:
For the plug-in receiver:
・Please plug it into a safe power outlet
・Do not expose the receiver to water spray or
water drops and do not place liquid-filled
objects such as vases or opened drink
containers on or near the receiver and the
outlet.
・Unplug the receiver immediately if you sense a
burning smell or smoke. Have qualified
personnel check the receiver before using it
again.
・Unplug the receiver from the outlet if the
doorbell system is not to be used for an
extended period of time.
For the battery-operated receiver and push button:
・Weak battery can greatly reduce the ringtone of
the receiver, please replace with the same
voltage and type batteries every 8-10 months.
- 05 -
・Always insert the battery using the correct
polarity to eliminate the danger of fire.
・Keep old and new batteries away from children.
・Old batteries should be properly disposed using
safe environmental practices.
・Remove the batteries from the receiver and
push button if the doorbell system is not to be
used for an extended period of time.
4. Operation:
A. Selecting the notification mode:
The doorbell receiver can notify after the push
button has been pressed by playing a ringing
sound, flashing an LED, or ringing and flashing
an LED at the same time. These are referred to as
Sound, Flash, and Sound + Flash mode.
To select the notification mode, switch the
sound and flash switch to one of the following
positions:
Sound only mode
Sound + Flash mode
- 06 -
Flash only mode