AmpliVox SB8001 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AmpliVox SB8001. AmpliVox SB8001 8 pages. With bluetooth battery powered pa system
Imprimer la page
Getting Started/Quick Setup
1. Power unit on with rocker switch.
2. The WIRELESS RECEIVER has its own POWER / VOLUME
Control. Turn Receiver Power On. A Frequency Channel will
appear in the Channel Display. Press UP/DOWN Buttons to
select a channel. Channel number must match channel num-
ber on wireless transmitter.
3. Wireless Microphone/Bodypack Transmitter– set the
transmitter channel selector switch to the same number that
is displayed on the receiver. Select channels 1-16. Install 2 -
"AA" batteries into battery compartment of wireless micro-
phone transmitter or install 1 - "AA" battery into battery com-
partment of wireless bodypack transmitter.
4. MAIN BATTERY STATUS indicator - Red = no battery
power, If four LED's are glowing, means fully
charged. Charge batteries overnight for best results.
If you need further assistance, please call
1-800-267-5486, 8am-6pm M-F CST .
SW800 SPECIFICATIONS
Rated Power Output:
100 Watts RMS
Speaker :
8" Bass
4" Tweeter
Frequency Response:
40Hz to 20Khz
Sensitivity:
96dB
Tone Controls:
Separate Bass and Treble
Wireless Range:
Up to 300 Feet
Wireless Frequency:
UHF 584 - 608 MHz
Bluetooth:
A2DP Version 3.0
Microphone Input:
XLR /1/4" combo connector
Wired Microphone:
AmpliVox or other compatible brands
PLEASE NOTE: THE REMOTE DOES NOT
TURN THE UNIT ON OR OFF. YOU MUST
DO THAT ON THE CONTROL PANEL
Battery:
AC Power Input:
Weight:
Dimensions (HWD ):
Extension Handle:
Speaker Mount:
Warranty:
3
(2) 12 volt rechargeable SLA, 5 AH,
User accessible and replaceable
120 V / 60 Hz
33 lbs.
18.5" H x 13.5" W x 12" D
21", Locking
1 3/8" pole mount receptacle
1 year Limited Warranty;
Remote Control, Wireless
Microphones, Wireless Receiver,
Bluetooth Module, CD / Media
Player, Rechargeable SLA Batteries.