Comco ProCenter Plus Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Comco ProCenter Plus. Comco ProCenter Plus 2 pages.

Maintenance

Abrasive Containment and Disposal

Empty the abrasive hopper by placing a pail

or plastic bag under either of the hopper

outlets and open the valve.

Empty the container and repeat as needed.

Warning: Excessive abrasive in the hopper may

cause powder to leak through vent holes.

Filter Cleaners

Filter cleaning mallets are located on both

sides of the ProCenter Plus. Before each

shift, with the power turned off, pull and

release the mallets two or three times.

This action will dislodge spent media that

may have collected in the HEPA filter.

Changing the HEPA Filter

Remove any equipment sitting

on top of the filter box.

Disconnect the power cords

on both sides of the filter box.

Remove filter box cover.

Remove and replace filter.

(CTR280‐1 Replacement HEPA

filter assembly)

Air Dryer Maintenance

The desiccant inside the air dryer bowl will gradually turn from bright

orange to dark green as it becomes saturated. Change according to

the instructions included with the

air dryer.

For maintenance instructions on your

air dryer, please see manual "AD5100

Series – Desiccant Air Dryer."

ProCenter Plus

Manual

NEED HELP?

Comco Tech Support: 818‐841‐5500

8/2021

www.comcoinc.com

TS414