Follett REF1 Manuel d'installation, d'utilisation et d'entretien - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Follett REF1. Follett REF1 19 pages. High-performance compact refrigerators
Imprimer la page
Cleaning
CAUTION!
Use only non-chlorine-based cleaners. Use of cleaners containing chlorine can cause staining and pitting
of the stainless steel
Interior
Using a sponge or soft cloth, clean unit with a non-abrasive, non-chlorinated, all-purpose detergent.
Exterior
Wipe exterior with a soft cloth in the direction of grain as needed. Stainless steel polish may be used to enhance
the fi nish of the unit.
Annual Cleaning
Removal of dust and other particulates from air intake areas and the condenser is important for proper operation.
Under certain conditions, some environments with large amounts of dust may require more frequent cleaning.
1. Move the power switch on lower rear panel to OFF and unplug
the refrigerator.
2. Remove rear panel (Fig. 14).
3. Remove drain pan.
4. Clean drain pan with a non-abrasive, non-chlorinated
all-purpose detergent.
5. Reinstall drain pan.
6. Use a vacuum cleaner with brush attachment to clean
condenser, compressor motor, and related parts.
7.
Reinstall rear panel.
Service –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Door Gasket Replacement
1. Remove existing gasket from mounting track (Fig. 15).
2. Verify mounting track is free of any remaining gasket material.
3. Align new gasket with mounting track and press fi rmly in place.
4. Open and close door, checking for proper gasket seal without
pinching against refrigerator.
12
REF1/REF2 Compact Refrigerators
Fig. 14
Fig. 15