Follett 110CT425W Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Follett 110CT425W. Follett 110CT425W 17 pages. Ice and water dispenser
Imprimer la page
Installing countertop dispensers
CAUTION!
Dispensers with top mount ice machines cannot
be mounted on legs. They must be bolted to
counter. Use gloves when lifting ice machine to
protect hands from sheet metal edges.
1. Position dispenser in desired location, mark
dispenser outline on counter and remove
dispenser.
2. Regardless of whether utilities will exit
through back or bottom of dispenser, drill
four (4) 3/8" holes in counter to anchor
dispenser to counter (Fig. 2).
Note: Follett countertop dispensers can have any
or all utilities run directly through counter or
out rear of dispenser. For dispensers with
any utilities exiting through counter, make
counter cut-out (Fig. 2).
3. For utilities exiting through bottom only:
(a) Make cut out as shown (Fig. 2).
(b) Move drain fitting from back of dispenser
and mount where shown (Fig. 3).
(c) Cut drain tube to length and attach to barbed
connection.
(d) Move inlet water fitting from back of
dispenser and mount where shown (Fig. 3).
(e) Cut water tubing to length and re-insert into
water fitting.
Note: Utility connections can be accessed through
front of dispenser by removing stainless
steel splash panel, or by removing access
panel (Fig. 4) on back of dispenser.
6
110CT425A/W, 110FB425A/W
Fig. 2
UNDERSIDE VIEW OF DISPENSER
23.63" (60.0 cm)
14.00" (35.6 cm)
2.00" (5.1 cm)
9.25"
CUTOUT
(23.5 cm)
Fig. 3 – Bottom exiting utilities (countertop units)
drain tube
0.44"
(11 mm)
1.50"
(3.8 cm)
17.31"
(44.0 cm)
bracket
drain
tting
inlet
tting