Daihan Scientific WiseSpin CF-10 Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Daihan Scientific WiseSpin CF-10. Daihan Scientific WiseSpin CF-10 18 pages. High performance pro-micro centrifuge
Imprimer la page
DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
3. Product Usage
3.3 Usage Instructions
Connect the power cord to the proper power socket and Turn on the Main Switch.
-
The Air hole is closed with rubber plug for shipment at factory. Remove the plug for use.
-
Push the "Open" button to open the door and check the rotor for abnormality. And, put the
-
sample tube of same weight for symmetry.
Press strongly the Door (Lid) so that it is completely closed with the Electronic Safety Lock.
-
* Operation method for Jog-Dial
Jog-Dial can be manipulated for the setting in each mode by Turning and Push motion.
-
If turning the Jog-Dial knob to clockwise or counter-clockwise, the setting values can be
-
adjusted, and if briefly pressing once the PUSH button, the Start or the Stop operation is
performed.
The Turning of the Jog-Dial knob does not manipulated during operating, and if resetting
-
the set value, it can be adjusted by the Jog-Dial knob after stopping the product by pressing
briefly once the PUSH button.
If pressing for 2 or 3 seconds the PUSH button, the set value is saved, and even if the
-
power is turned on again, that value is maintained. (If "0" value is saved, the setting value
is initialized.)
① MODE - Set Rotation Speed
When the power is turned ON, the initial screen is the setting mode of the set Rotation
-
speed mode.
ROTATION LED(Red)
ROTATION LED is lighted during the operation of Rotation, and indicates that it is operating.
-
DAIHAN Scientific, High Performance Pro-Micro Centrifuge " CF-10 "
ROTATION
STIRRING
1350 RPM
POWER
< Fig 3.3.1. Set Rotation Speed Mode >
TIMER
1350 RPM
Set RPM
Present RPM
13/37