Daihan Scientific WiseSpin CF-10 Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Daihan Scientific WiseSpin CF-10. Daihan Scientific WiseSpin CF-10 18 pages. High performance pro-micro centrifuge
Imprimer la page
DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
4. Products Management Method
4.2 Maintenance and Management
High Performance Pro-Micro Centrifuge
consideration of various situations that may occur during the operation.
However, for long-term use with stable performance, please observe the following precautions:
1. If the unit is not to be used for an extended period of time, disconnect the power cord from
the wall socket.
2. DAIHAN is not responsible for damage to the unit caused by abnormal use or by not
heeding warnings and cautions in the manual or unauthorized modifications of the unit.
3.
When changing the installation place of the device, please do not apply the mechanical
shock and vibration. When changing the installation place, please get help from a
professional.
CLEANING
1. Before cleaning the unit, disconnect the power cord from the wall socket. Otherwise, it
may cause an electric shock or fire.
2. To clean the unit, a neutral detergent and soft cloth is recommended. Do not use coarse
cloth, strong chemicals or organic solutions.
3. Do not use water, Benzene, Thinner or any alcohol for cleaning the product. It may
cause discoloration, damage, an electric shock or fire.
4. If you expect damage by a chemical during cleaning, call technical support team.
4. Products Management
4.3 If product Defect Occur
Situation
If power does not turn ON.
If does not rotation.
※ If you have any problem other than the above, please call technical service of manufacturer
or an official agent.
DAIHAN Scientific, High Performance Pro-Micro Centrifuge " CF-10 "
was manufactured with the
Confirmations and Solutions
Make sure that Power Cord is plugged well.
Check that there are no problems in the power supplied.
Check the Set RPM.
Check the Lid is opened.
Check the any prevent material beside rotator.
Check if the MAIN power switch is ON.
17/37