Follett C50T5A/W Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Follett C50T5A/W. Follett C50T5A/W 13 pages. Ice and water dispenser
Également pour Follett C50T5A/W : Manuel d'utilisation, d'entretien et de pièces détachées (17 pages)
Imprimer la page
Counter cut-outs
9" x 14"
229 mm x 356 mm
cutout
. 375"
10 mm
267 mm
23.0625"
586 mm
16.75"
2.125"
425 mm
54 mm
21"
533 mm
Counter cut-out for units with drain pan
Installing countertop dispensers without legs
1. For units where utilities will exit through back of dispenser, remove cap from drain fitting on back of unit and install
cap on fitting tee inside dispenser.
2. Position dispenser in desired
location, mark dispenser outline on
counter, and remove dispenser.
3. Regardless of how utilities will be
connected, drill four (4) holes in
counter to anchor dispenser to
counter (see figures above).
4. For units with utilities exiting
through counter, make appropriate
counter cut-out as shown above.
5. Apply a thick bead - approximately
1/4" (6 mm) diameter - of NSF
listed silicone sealant (Dow-
Corning RTV-732 or equivalent)
1/4" (6 mm) inside marked outline
of dispenser.
6. Carefully lower dispenser on counter in
proper position and secure to counter with four (4) bolts.
7. Smooth excess sealant around outside of dispenser.
8. If dispenser has remote icemaker and unit is equipped with water station accessory, make water connection for water
station inside dispenser as indicated.
9. Make final connections. Proceed with instructions for installing remote or integral icemakers as appropriate.
Note: Electrical connection box can also be accessed through front of dispenser by removing front cover, black plastic
chute cover and stainless splash panel.
.5" (13 mm) to
cutout
10.5"
.375"
diameter -
4 places
Shaded
areas
indicate
internal
connections
access
panel
junction box
plumbing
connection
6.125"
15.6 cm
Rear connections – Countertop
models with integral icemakers
9" x 14"
229 mm x 356 mm
cutout
1.5626"
40 mm
12.5"
267 mm
318 mm
20.125"
(511 mm)
21" (533 mm)
2.5"
(64 mm)
19"
483 mm
Counter cut-out for units without drain pan
junction box
plumbing
connection
electrical
connection
3/4"
FPT drain
5.156"
13.1 cm
10.5"
26.7 cm
14.75"
37.5 cm
4
.5" (13 mm) to
cutout
10.5"
.375"
diameter -
4 places
6" min.
152 mm
3/4"
1.9 cm
FPT drain
6.125"
15.6 cm
14.75"
37.5 cm
Rear connections – Countertop
models with remote icemakers
ICDI220
access
panel
electrical
connections
ice transport
tube
5.156"
13.1 cm
10.5"
26.7 cm