Amprobe TIC 300 PRO Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Amprobe TIC 300 PRO. Amprobe TIC 300 PRO 15 pages. Meet the new standard in non-contact, high voltage detection
Également pour Amprobe TIC 300 PRO : Manuel de l'utilisateur (18 pages), Manuel de démarrage rapide (4 pages)
Imprimer la page
Find Quality Products Online at:
MAINTENANCE AND REPAIR
If there appears to be a malfunction during the
operation of the voltage detector, the following steps
should be performed in order to isolate the cause of the
problem:
1. Check the battery.
2. Review the operating instructions for possible
mistakes in operating procedure.
Except for the replacement of the battery, repair of
the voltage detector should be performed only by a
Factory Authorized Service Center or by other qualified
instrument service personnel.
Cleaning
The front panel and case can be cleaned with a mild
solution of detergent and water. Apply sparingly with a
soft cloth and allow to dry completely before using. Do
not use aromatic hydrocarbons or chlorinated solvents
for cleaning.
Battery Replacement
Use a Phillips blade screwdriver to remove the battery
hatch screw. Lift the hatch. Remove the battery and
replace it with a 9 V alkaline battery. Make sure the seal
is in place. Close the battery hatch and replace the screw.
9
GlobalTestSupply
www.
.com