Amprobe VPC-20 Manuel d'instruction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Amprobe VPC-20. Amprobe VPC-20 2 pages. Digital voltage and continuity tester

Imprimer la page

Replacing the Batteries

If the sign "BAT" appears on the LCD display, it indicates that the batteries should be

replaced. Remove screws on the back cover and open the case. Replace the exhaust-

ed batteries with new batteries. (AA(2);NEDA 15F or IEC R6)

2xAA

Disconnect probes from

Voltag. Do not over-tighten

screws

WARRANTY

Congratulations! Your new instrument has been quality crafted according to quality

standards and contains quality components and workmanship. It has been inspected

for proper operation of all of its functions and tested by qualified factory technicians

according to the long-established standards of our company.

Your instrument has a limited warranty against defective materials and/or workmanship

for one-year from the date of purchase provided that, in the opinion of the factory, the

instrument has not been tampered with or taken apart.

Should your instrument fail due to defective materials, and/or workmanship during this

one-year period, a no charge repair or replacement will be made to the original pur-

chaser. Please have your dated bill of sale, which must identify the instrument model

number and serial number and call the number listed below:

Repair Department

ATP – Amprobe, TIF, Promax

Miramar, FL

Phone: 954-499-5400

800-327-5060

Fax : 954-499-5454

Website: www.amprobe.com

Please obtain an RMA number before returning product for repair. Outside the U.S.A.

the local representative will assist you. Above limited warranty covers repair and

replacement of instrument only and no other obligation is stated or implied.

P/N: ATP VPC-20Manual

Miramara, Florida 33025

Tel: 954-499-5400 Toll Free: 800-327-5060 Fax: 954-499-5418

printed in China