Amprobe ACD-6 Pro Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Amprobe ACD-6 Pro. Amprobe ACD-6 Pro 17 pages. Professional 1000a clamp meters
Également pour Amprobe ACD-6 Pro : Manuel de l'utilisateur (16 pages)
Imprimer la page
SyMbOLS
�
Battery
�
Double insulated
�
Direct Current
�
Alternating Current
Conforms to relevant
�
Australian standards.
Do not dispose of this product
�
as unsorted municipal waste.
Application around and removal from hazardous live conductors is
�
permitted
SAfETy INfORMATION
• The ACD-6 PRO and ACD-6 TRMS-PRO Digital Clamp meters conform to IEC/EN/UL 61010-1
Ed. 3.0; CAN/CSA C22.2 No.61010-1-12 Ed. 3.0 to Measurement Category III 600 V, class
II, pollution degree 2; IEC/EN 61010-2-032 Ed. 3.0; IEC/EN 61010-2-033 Ed. 1.0 and IEC/EN
61010-031 Ed. 1.1 (test leads).
• The instrument conforms to CENELEC Low-voltage directive 2006/95/EC and
Electromagnetic compatibility directive 2004/108/EC.
• This instrument is EN61010-1 certified for Installation Category III (600V). It is
recommended for use in distribution level and fixed installations, as well as lesser
installations, and not for primary supply lines, overhead lines and cable systems.
• Do not exceed the maximum overload limits per function (see specifications) nor the limits
marked on the instrument itself. Never apply more than 600 Vdc/600 V ac rms between
the test lead and earth ground.
� Warnings and Precautions
• Before and after hazardous voltage measurements, test the voltage function on a known
source such as line voltage to determine proper meter functioning.
• Disconnect the test leads from the test points before changing meter functions.
• Disconnected from the meter's test leads before measuring current.
• Inspect the Clampmeter, test leads and accessories before every use. Do not use any
damaged part.
• Never ground yourself when taking measurements. Do not touch exposed circuit elements
or test probe tips.
• Do not operate the instrument in an explosive atmosphere.
• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• The meter is intended only for indoor use. To avoid electrical shock hazard, observe the
proper safety precautions when working with voltages above 60 VDC, 42.4 Vpk, or 30 VAC
rms. These voltage levels pose a potential shock hazard to the user.
• Before and after hazardous voltage measurements, test the voltage function on a known
source such as line voltage to determine proper meter functioning.
�
Refer to the manual
�
Dangerous Voltage
�
Earth Ground
�
Audible tone
�
Complies with EU directives
Underwriters Laboratories.
[Note: Canadian and US.]
5