Advanced Avionics HyperBlast Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Advanced Avionics HyperBlast. Advanced Avionics HyperBlast 7 pages.

Imprimer la page

Do I have to dishcarge my

batteries?

Both NiCd and NiMH batteries have a limited number of times you can charge and

discharge them. The best way to get the absolute best life out of your battery is to only

use it in a vest when you need it. Discharging batteries before charging only uses up

more of the life of the battery. Having said that, there are conditions in a battery that

can cause the run time of a vest to become annoyingly low (<6 hours).

If this

happens, make sure that the battery has been discharged long enough so that the low

battery indicator is lit on the shoulders, and then fully charge the battery.

Do not leave the battery connected in a vest to discharge the battery overnight. This

could potentially cause individual cell voltage reversal and damage the battery. The

shoulder low battery indicators are the right indicator that the if a battery has been

charged at a high temperature, oonThe LaserBlast HyperBlast Charger was designed to

allow the end user to replace the pigtail cables if the Hypertronics connector is broken.

Repair of the Charger

The LaserBlast HyperBlast Charger was designed to allow the end user to replace the

pigtail cables if the Hypertronics connector is broken. All other repairs should be

referred to a qualified service technician.

To replace a pigtail, simply loosen the screws holding the strain relief bar, remove the

bad pigtail, and click a new one on. Replace the strain relief bar to prevent damage to

the white molex connectors.