Amprobe 095969917803 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Amprobe 095969917803. Amprobe 095969917803 15 pages. Ultrasonic leak detector

Imprimer la page

1.888.610.7664

5. MAINTENANCE

5.2 Changing the Transmitter Batteries

The ULD-400-T uses two 1.5 V AAA (LR03) batteries (supplied with ULD-420). To replace the

batteries, follow these steps:

1. Make sure that the Transmitter is turned off.

2. Loosen the battery-door lock with a flat screwdriver.

3. Remove the battery cover.

4. Replace the batteries as shown in Figure 5.2. Observe the battery polarity shown in the

battery compartment.

5. Replace the battery cover to the lock position.

Figure 5.2: Replacing the Transmitter batteries

5.3 Cleaning

The only maintenance the ULD-400 requires is inspection and cleaning. Periodically wipe the

exterior with a mild solution of detergent and water. Apply sparingly with a soft cloth and allow to

dry completely before using. Do not use aromatic hydrocarbons, gasoline or chlorinated solvents

for cleaning.

www.calcert.com

[email protected]