COMECO TI08-R Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} COMECO TI08-R. COMECO TI08-R 13 pages. Process indicator (trip alarm unit)

Imprimer la page

Value

w)10, w)5,

I)20, I$20

0, 0.0, 0.00, 0.000

-1999 ... 9999

0 ... 9999

0 ... 999

0 ... M

-1999 ... 9999

cooL, hEAt

0 ... 9999

-1999 ... 9999

FuLL, L1, no

check the PV(100%) value when potentiometer slide is positioned at 100%. If PV(100%) value and

by the formula:

Unit

w)10 (0...10 V), w)5 (0...5 V; potentiometer 0.5...10 kΩ),

I)20 (0...20 mA), I$20 (4...20 mA)

when indicating values with the input-signal measurement unit (ISU)

ISU

display offset value

ISU

used for input peak filtration; value '0' cancels the filtration

This parameter and the following one define a low-pass input filter.

ISU

M = 25% of input range

These parameters keep the set points in safe limits,

ISU

preserving them from random changes.

'cooling' - activates over set point, 'heating' - activates under set point

ISU

less than (high range limit - Set Point 1)

ISU

less than (Set Point 1 - low range limit)

sec.

pulse duration; value '0' disables pulse mode

sec.

pause duration; value '0' disables pulse mode

sec.

Value '0' disables hold mode.

within operating range limits Input Low ... Input High, considering

ISU

SP Limit Low(High), Input Correction, and +/-Differential 1(2)

FuLL (full access), L1 (access only to parameters of level L1),

no (no access)

Notes

Table 1