CarcamOne HD 720p Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CarcamOne HD 720p. CarcamOne HD 720p 15 pages. High definition

Imprimer la page
Permanent recording inside a car
The CarcamOne is recording 15 minutes videos. Once space at the card is needed, it will
automatically erase the oldest files. In between two files there will be a gap of 3 seconds –
equal to 0,3% of the whole recorded file.
The default setting of the CarcamOne-cable is to detect the turning of the
engine – if your car is fitted with an energy saving system that stops the
motor or generator, or if it is powered by en electric motor you need to close
the red jumper inside the adaptor cable plug.
Set the Jumper
To close the jumper, open the adaptor first. At the PCB you will find the
jumper covering one pin only - the default setting to detect the generator.
Remove the Jumper and easily put it on both pins to activate the
start of the camera by "ignition" once served with power.
Play back at the computer
The videos can be displayed at the PC in an easy way.
We recommend to use the VLC Player (freeware) www.vlc-player.org. The player contains
many possibilities to adjust the picture, including a 180° flip option as well as brightness
adjustment.
Slide in a micro SD card with minimum 8GB of
space into the camera.
Fix the camera at the sucking pad and find a good
position at the windshield. Adjust the head into the
right direction. Plug the 12/24V adaptor into the
cigarette socket.
Make sure the wire never limits you action – also
in case of Danger!
Starting the engine will activate the adaptor to start
as well the camera. When stopping the engine, also
the camera will close the file and shut down.
Connect the camera using the USB-
cable to your PC. Select the
appearing "MSC" Mass storage
Container to use the camera as a
drive.
Press [START] with the left mouse
button and select the "Explorer" to
display all drives.
Select the exchangeable drive and
find the video data in the contained
folders.