AMQ ACTIV-Pro Manuel d'utilisation et de dépannage - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et de dépannage pour {nom_de_la_catégorie} AMQ ACTIV-Pro. AMQ ACTIV-Pro 12 pages. Sit-to-stand table
Également pour AMQ ACTIV-Pro : Manuel d'installation (12 pages), Manuel de l'utilisateur (7 pages), Manuel d'assemblage (16 pages)
Imprimer la page
Activ-Pro3 Troubleshooting Guide
Most issues will resolve by re-setting the base
See re-set instructions on the user guide .
Note:
Please make sure there is nothing under the base before setting to its lowest level (24 .5") .
If the cable is obstructed it will not reset properly .
Please ensure that all connections are tight and in tact before further troubleshooting .
Issue
ASR/RST Error Code
No power/LED on control box is off
E07/E08/E09 Error Code
(legs not moving uniformly)
H01 Error Code (Controller Overheat) Disconnect the power for 1 minute and then reconnect the handset .
Handset Display Error (eg, "88 .8")
LOC Error Code
For questions or support, please contact AMQ Customer Care at
Activ-Pro User / Troubleshooting Guide | 11
Solution
Reset the base .
The control box may be damaged – contact us for replacement .
1 . Reset the base .
2 . If the issue persists, swap the connecting cables .
3 . If the issue persists, contact us for a replacement .
The handset may be damaged – contact us for replacement .
Press and hold the M button until the height numbers
are shown on the display .
cc@amqsolutions .com
or (877) 801-0370 .
amqsolutions.com