Amroad DP3210 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Amroad DP3210. Amroad DP3210 12 pages. Door station

Installing Procedures

Install Main Unit

1. Lift Main Unit up Back Plate.

2. Let the rear side locate on Supporting

Hooks. Put down the Main Unit vertically.

3. Secure the Main Unit by fastening the 2

screws on the bottom. Then, the

installation would be completed.

4. The protective film on the Main Unit

should not be torn up during installation.

Do not tear up the protective film until

new residents move in the house.

Observe the bottom of Main Unit and Back

Plate.



If the Back Plate on the bottom of the

Main Unit is raised, it means that Main

Unit and Back Plate don't meet closely.

The waterproof function is not good. (A

little external force from top of the Main

Unit may improve this situation.)



However, if the bottom of Main Unit and

back plate meet closely, it means that

the DP3210 will be with better

waterproof function.



Apply Silicon Glue around the Main Unit

if required to strengthen waterproof

ability.

AMROAD DP3210