Amrotec S-200 Instructions de montage - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Amrotec S-200. Amrotec S-200 5 pages. Floor stand for coin sorters

Imprimer la page

Step 5.

Place your coin sorter on the stand securely by following the steps below

Locate the 4 holes on the Upper Side Bars as Picture # 8.

Locate 4 Pin (metal rod) at the bottom of the coin sorter.

Align those 4 Pin (metal Rod) with the holes on the Upper Side cover and fit the coin sorter inside these

holes perfectly (Please have 2 persons to perform this task to avoid any injury)

2 holes on

the left

Step 6.

Once the coin sorter is on the stand securely, press the lever to lock on the 2 caster wheels which should be

located on the front side of the Floor Stand.

Picture # 8

Lever locks to be tighten securely

to prevent machine to move

around which may cause injury

during operation.

2 holes on

the right