AMS AS5162 Manuel de programmation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de programmation pour {nom_de_la_catégorie} AMS AS5162. AMS AS5162 14 pages.

User Manual – AS5x61/AS5x62 Programming

b. You can go straight to burning the configuration in to the AS5x62. Go to Step 31.

23) During this procedure, DO NOT click on

24) Click

25) Click

26) Check if write/read Chksum is green

27) To program an AS5261(DualDie) Device, redo step 24 to step 26 for the Top Device.

28) Click

expected.

29) If satisfied with the results go to Step 31, otherwise, go to Step19.

30) Reset the device. You have to push the reset button on the UART Interface board by hand.

This will reset the programming configuration.

31) Go to Step 4 to repeat procedure to change unacceptable parameters.

**** Permanent Programming of AS5x61 beyond this point ****

32) Reset the device.

33) Select

34) Click

35) For programming the A5261(DualDie), redo point 34 and 35 at

36) Click

37) Click

power is applied to it.

38) Click

39) Click

www.ams.com

to check with an oscilloscope if your trimming is what you

This transfers all data to "Programming Mode" screen.

This will cause the AS5x61 to permanently enter into Output Mode when

Revision 1.0 / 10/31/12

page 11/14