Dr. A. Kuntze K 100 W PR Manuel - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dr. A. Kuntze K 100 W PR. Dr. A. Kuntze K 100 W PR 20 pages. Measuring and control instruments for ph and orp measurement
Imprimer la page
3.2 Menu overview
6.98 pH 25.0°C
S1 S2 Auto
Main menu
Calibrate
Temp. comp.
Enter password
Set points
Limit values
Basic settings
Service
Main menu and basic settings
The parameters are sorted into two menus: In the main menu you will find all functions
which are used regularly, such as calibration. The menu basic settings contains all
parameters which are set just once during start-up.
On the following pages you will find information on how to adjust parameters and
which parameters you need for which application. The information follows the
following scheme:
1) General adjustments: password and language
2) Adjustments for measurement: calibration and temperature compensation for
pH or selection of ORP measurement
3) Adjustments of the controller: selection of the controller version and
corresponding parameters
4) Adjustments to read out data: analog, digitally and/or as alarm
Display of the measured values
Press key
to enter the main menu.
Calibration function (only for pH measurements)
Temperature compensation (only for pH measurements)
Password function
Controller settings - set points, P ranges, I functions
Alarm function
Basic settings
Cal. Pt100
Buffers used
Contr. settings
Turn-on delay
Analog output
Language
Bus adress
pH / ORP
K 100 PR & K 100 W PR
All parameters which are set
just once at the beginning
can be found in the menu
„basic settings"
3.2 Menu overview
17