Amsberg WR2100P Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Amsberg WR2100P. Amsberg WR2100P 6 pages. Mobile signal booster
Imprimer la pageSignal Booster Unit
BTS Port
Connect to outdoor antenna
Power / Step Switch
Turn on/off power
Digitally control gain 1dB step
Screen & Switch
Gain Counter
Mini Power - 24~60dB
Pro Power - 29~65dB
Power Status
MGC Step Switch
1 click increase 1dB gain
Indicator & Alarm
When the repeater receives a signal, it will show the signal strength through solid bars.
-50dB equal a full signal (five bars); -55dB equals four bars; -60dB equals three bars;
-65dB equal two bars and -70dB equals one bar.
If outside borders of the signal bars flash, the repeater is not receiving a sufficient signal.
Please check cable connections or adjust the external antenna.
If the repeater receives a signal better than -45dB, the entire signal scale will flash.
This can be caused by oscillation or low proximity to the signal source. Please extend the distance
between the repeater and outdoor antenna and/or reduce gain by adjusting the gain level by click
down arrows. The problem can also be caused by interference from other objects like satellite dish.
Remarks:
1) Default gain is set to maximum strength 60/65dB. Turn off or disconnect power source will reset gain counter.
2) The repeater will show the received signal strength, it may not resemble the signal outside.
SIGNAL BOOSTER GSM
PRO
Mobile Port
Connect to indoor antenna
Power
Connect to power supply
Screen & Indicator
Show repeater status
RSSI indicator / Alarm
Signal Bar & Alarm
Power Switch
Turn on/off repeater power
MGC Step Switch
1 click reduce 1dB gain