AmScope DM140 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AmScope DM140. AmScope DM140 12 pages. Portable digital microscope

Imprimer la page

Quick Start

1. Connect the microscope to the power supply via the switch cable.

2.Then press and hold the Power button ( Power-Of from the Figure 1) underneath

the display until the display turns on. (It may turn on automatically, and

it's normal phenomenon.)

*Troubleshooting

If the display freezes, locate the "reset " hole(as Figure 2 shows) on the

back of the monitor. Use a narrow object such as an unfolded paperclip to

depress the button located inside. This resets all settings to their factory

values and restarts the display . It does not erase saved images or video.

Instructions for using the movable block and the light barriers

Movable block: When using the microscope slides

to observe objects, it can fix the slides.

(Note: When observing the slides, try to use 3 different

light barriers and adjust the brightness of the built-in LED

light to obtain the desired image effect.)

Uniform light plate: When observing the

microscope slides, it can make the bottom

illumination more uniform and the image more clear.

Black backlight: When you need to observe the

details of small objects, it can make the sensor

increase the image gain and the details clearer.

White backlight: When a white background image

is needed, it can be used.