Dr. Dunk SPTBBLDRDBS16 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dr. Dunk SPTBBLDRDBS16. Dr. Dunk SPTBBLDRDBS16 19 pages.

Heavy-Duty Basketball Stand - SBA305 - A Series

Secure the top of the outer lifter pole (EE) to the

backboard brace (longer) (T) with bolts A1 –

A4. The bushing A2 must be between the

backboard (longer) (T) and the outer lifter pole

(EE).

Secure the inner lifter pole (FF) to the triangular

block (Q) with bolts L1 – L3.

Do not tighten nut all the way. It will need to

be removed when adding tensioning springs

in the next step.

E&OE

Install the link block (Z) at the top end of the top pole (W)

with bolts K1 – K4. The bushing (K2) must be put at the

side of the top pole with bolt K1 to prevent the top pole

from bending out of shape. Do not secure the bolt K1 too

tightly before securing the pole brace (S, T) first.

Connect the backboard brace (S, T) on the link block of

the top pole (Z) with bolts B1 – B4 and D1 – D3. The

bushing (B2) must pe put inside the link block (Z) with bolt

B1 to prevent the link block (Z) to bend out of shape.

Finally, install the cap on the top pole (W).

Refer reference

image

on page 17

Refer reference image

on page 17