AMSEC SafeWizard II Référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} AMSEC SafeWizard II. AMSEC SafeWizard II 4 pages.

Turning the safe On/Off

First Time Log In for PIN Only Users

The Pin Only User Code is an eight digit number; the first two digits are the user

ID number, in example, user 01, followed by the six digit pin number, factory

preprogrammed as 1, 1, 1, 1, 1, 1. The system will prompt for a change of this pin

number at your first log in.

1. Start by entering the User 2-digit ID Number, followed by the factory PIN

1, 1, 1, 1, 1, 1. Press ENTER/SAVE.

2. Screen will display a prompt to change your pin, press Enter to change the Pin.

Enter your new 6-digit PIN. Press ENTER/SAVE.

3. Screen will display "Confirm New PIN", enter same 6 digits. Press ENTER/SAVE.

4. Screen will then revert to the Main Menu, and your Pin has now been changed.

After the first login is complete and the factory user pin has been changed to a

personal pin, future log in will only require the 2-digit User ID followed by the 6-digit

personal pin to access the Main Menu.

For Key Users: First Time Log In with KEY and PIN

The Key replaces the 2-digit user ID when entering your PIN Code.

1. Present Key to the reader port.

2. Enter factory PIN 1, 1, 1, 1, 1, 1, and follow same instructions as above to change

the factory Pin. Once complete, future log in will only require presenting your key