Dr. Mach MACH 120 Series Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dr. Mach MACH 120 Series. Dr. Mach MACH 120 Series 19 pages. Ceiling, wall, new-type stand model
Également pour Dr. Mach MACH 120 Series : Instructions de montage, mode d'emploi (19 pages)
Imprimer la page
MACH 120F/120
01
27
11
02
59080001
Ceiling, Wall, Stand model
Edition 08
4.3 Changing of spare parts
4.3.1 Changing the halogen bulbs
Dr. Mach uses special halogen bulbs as illuminants.
Only original Dr. Mach replacement bulbs may
be used.
The use of other bulbs can lead to a considerable
reduction of the light power and increase in the
thermal load.
To change the bulbs proceed as follows:
• Attention!! Turn off the lamp!
• Loosen three screws 27 at the base frame 01.
• Remove housing lower part 02 by pulling it
downwards.
Attention! If the bulb is changed immediately
after operating the lamp, some parts of the lamp
may be hot.
Do not touch the halogen bulb with naked
hands.
• Draw halogen bulb 11 (22,8-24V/50W) carefully
from its socket.
• Put in the new halogen bulb.
• Mount the housing lower part 02 in reverse order
of dismounting it.
Remark:
The halogen bulbs have a service life of approx.
1000 hours without any deterioration in their
luminosity.
4.3.2 Changing the fuses
Because of the external transformer of the Mach
120 lamps, the necessary fuses must be provided
by the customer.
Pay attention to the instructions from the local
installer.
06.02.2010 / Bak Page 7/19
Dr. Mach
Lamps and Engineering