Electrolux # Manuel d'utilisation et d'entretien - Page 10

Setting Surface Controls

LOCATIONS OF THE SURFACE RADIANT ELEMENTS

On/Off

POWER

Fig. 1 - 30" cooktop

Fig. 2 - 36" cooktop

Fig. 3

Your cooktop is equipped with radiant surface burners with different wattage

ratings. The ability to heat food quicker and in larger volumes increases as the

element wattage increases.

The radiant surface elements are located on the 30" cooktop as follows:

2 small radiant elements located at the right and left rear positions;

1 dual radiant element located at the right front position;

1 triple radiant element located at the left front position;

The radiant surface elements are located on the 36" cooktop as follows:

2 small radiant elements located at the right and left rear positions;

1 dual radiant element located at the center front position;

2 triple radiant elements located at the right and left front positions;

The recommended way to use the touch pads on the cooktop is shown in

Fig. 3. Be sure that your finger is placed in the center of the touch pad as

shown. If the finger is not placed on the center of a pad, the cooktop may

not respond to the selection made.

Lightly contact the pad with the flat part of your entire fingertip. Do not just

use the narrow end of your fingertip.