Electrolux 241868902 Manuel d'utilisation et d'entretien - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux 241868902. Electrolux 241868902 42 pages. Side-by-side refrigerator

Electrolux 241868902 Manuel d'utilisation et d'entretien
IMPORTANT
The two drop in insulating inserts need to remain
in place while the Perfect Temp Drawer is on.
Removing the inserts will cause the temperature
of the crispers below it to be affected.
The drop in insulating inserts can be hand
washed with mild soap. Do not wash in a
dishwasher.
Do not clean the display area of the Perfect Temp
Drawer with abrasive or caustic cleaners. Wipe
clean with a moist sponge.
NOTE
When turned off the Perfect Temp Drawer
functions as a non temperature controlled drawer.
The Perfect Temp Drawer is intended for
packaged food products only. Leafy vegetables
and unpackaged fruits are best kept in one of the
lower crisper drawers.
The thaw setting holds a temperature for thawing
frozen foods for a specific amount of time. At the
end of that time, it then switches to the mixed
items setting to store the thawed food.
CAUTION
The Perfect Temp Drawer and frame can be
removed for cleaning but the control unit,
attached to the back of the fridge, cannot be
removed. Do not immerse the Perfect Temp
Drawer frame in water. Clean with a damp
cloth or sponge but prevent any liquid from
getting into the connector.
Storage Features
To remove the Perfect Temp Drawer frame and pan
for cleaning:
1 Wearing safety glasses, gently place a flat-
head screwdriver behind the snap between
the metal slide and the crisper pan.
2 Carefully rotate a quarter (1/4) turn. Do not
use a prying motion as this may damage
your crisper.
3 Lift the front slightly and remove the drawer.
To remove the Perfect Temp Shelf Assembly:
1 Carefully unplug the connector located at the
top right corner from the control unit under
the shelf by pressing the catch release.
2 Pull the connector out.
3 Lift the front of the shelf assembly up off of
the front support pins.
21